UTEX Industries, Inc. Sheet Packing

   Home Page
   History
   Vision, Mission , Core Values
   Corporate
   Biographies
   Locations
   International Distributors
   Link to AccuSeal
   ISO Certificate Utex AccuSeal
ISO Certificate Applied Rubber Tech

   Mechanical Seals
   Compression Packing
   U-PAK® Injectable Sealant
   Sheet Packing
   Packing Tools
   X-TendaSeal® Repair Services
   Molded Products
   Engineered Plastics & PTFE
   THERMEX™ Gasket Tape
   Well Service Packing
   Spring Energized Seals
   Product Search
   Literature Library

Contact Information

Search Site
Search Literature

UTEX Industries, Inc. Sheet Packing

			PERFORMANCE DATA
Style 1148		Fiberglass fabric with a tacky natural rubber coating to provide adhesion during installation. Applications Recommended for thermal insulation, hand hole, manhole, or tadpole gaskets, fire doors, access doors, and static boiler and door applications, especially where steam is present. Suitable for low pressure steam, water, and other general services. Not suitable for ozone or UV light exposure.	TEMPERATURE, MAXIMUM	1000°F (582°C)
			PRESSURE, MAXIMUM	180 psi; (12.4 bar);(1.24 MPa);(12.7 kg/cm²) (In Steam Service)
			MULLENS BURST STRENGTH D-751-89	N/A
			TENSILE STRENGTH N/A	N/A
			DENSITY	96 lbs/ft³ (1.54 g/cc) Typical
			pH RANGE AT AMBIENT TEMPERATURE	4 to 9
			DUROMETER, SHORE "A" ASTM D2240	N/A
			BOLT TORQUE
			"M" Gasket Factor - 2.25 for all thicknesses
			"Y" Gasket Factor - 2200 psi (151.7 bar) for all thicknesses
			Availability 1" (25.4 mm), 2" (50.8 mm), and 4" (101.6 mm) width rolls with 1/16" (1.59 mm) thickness and length to be specified up to 50 yards. Other thicknesses may be obtained by laminating one or more sheets. Approximate weight: 5 lbs/yd (2.5 kg/m) based on a 1/16" (1.59 mm) thickness and 4" (101.6 mm) width.
Dimensions: Thickness: PDN:

©2009 UTEX Industries Inc. All rights reserved.