| |
PERFORMANCE DATA |
|
Style
1128
|
|
Top quality close mesh, mild steel wire-reinforced non-asbestos material for severe
conditions. Utilizes a nitrile rubber binder and is graphited on one side to produce a
black-colored sheet. Also resilient to fluctuating temperature and pressure.
Applications
Recommended for gasket and other static applications. Recommended for ammonia, gases,
water, steam, inorganic salt solutions, mild acids, alkalies, hydrocarbons, oils and
greases, alcohols, ethers, and heat transfer oil applications.
|
TEMPERATURE, MAXIMUM |
750°F (400°C)
|
| PRESSURE, MAXIMUM |
1400 psi; (96.5 bar);(9.65 MPa);(98.4 kg/cm²)
|
| MULLENS BURST STRENGTH D-751-89 |
N/A
|
| TENSILE STRENGTH
(across grain)(ASTM F152)
|
3000 psi (20.7 MPa) Typical
|
| DENSITY |
131 lbs/ft³ (2.1 g/cc) Typical
|
| pH RANGE AT AMBIENT
TEMPERATURE |
3 to 12
|
| DUROMETER,
SHORE "A" ASTM D2240
|
N/A
|
| BOLT TORQUE |
|
|
"M" Gasket Factor - 2.0 for 1/32" (0.79 mm) and below
2.0 for 1/16" (1.59 mm) and below, 5.0 for 1/8" (3.18 mm) and below
|
|
"Y" Gasket Factor - 6000
psi (41.4 MPa) for 1/32" (0.79 mm) and below, 6500 psi
(44.8 MPa) for thicknesses over 1/16" (1.59 mm), 8400 psi
(57.9 MPa) for 1/8" (3.18 mm) sheet and below
|
Availability
60"x60" (152x152 cm) and 60"x120"
(152x305 cm) sheets with 1/64" (0.4 mm), 1/32" (0.79 mm),
1/16" (1.59 mm), 3/32" (2.38 mm) and 1/8" (3.18 mm) thicknesses. Other sizes
available on request.
Approximate weight: 17 lbs (7.7kgs) based on a
60" x 60" (152x152 cm) x 1/16" (1.59 mm)
|
|
|
