UTEX Industries, Inc. Seats

   Home Page
   History
   Vision, Mission , Core Values
   Corporate
   Biographies
   Locations
   International Distributors
   Link to AccuSeal
   ISO Certificate Utex AccuSeal
ISO Certificate Applied Rubber Tech

   Mechanical Seals
   Compression Packing
   U-PAK® Injectable Sealant
   Sheet Packing
   Packing Tools
   X-TendaSeal® Repair Services
   Molded Products
   Engineered Plastics & PTFE
   THERMEX™ Gasket Tape
   Well Service Packing
   Spring Energized Seals
   Product Search
   Literature Library

Contact Information

Search Site
Search Literature

UTEX Industries, Inc. Seats

	Seats
View Available Models		View Product Specification Sheet
Seat Types
Contact us about seats

The correct choice of seat material and design is critical to the success of a seal installation. UTEX has developed a wide selection of seat designs to satisfy sealing requirements. Using tungsten carbide, silicon carbide, AlOx ceramic, Ni-Resist or other customer specified materials, UTEX will match the correct seat to the seal operating conditions. O-ring, L-type, Clamp-type and others are all manufactured to exacting tolerances. Contact UTEX for your specific requirements.

Seat Types

		1. O-ring seat. For a wide range of general service applications. Various o-ring elastomers may be used to improve chemical resistance. 2. Square section seat. A widely used seat configuration, it can be furnished with various o-ring materials to match pump conditions. 3. Floating seat. Available for those glands requiring "L" section seats. They are furnished with anti-rotation slots and various o-ring elastomers. 4. Modified "L" section seat. Similar to the floating seat, but furnished with a PTFE gasket and anti-rotation slots as standard. Provides increased chemical resistance. 5. T-type clamped seat. Provides wide temperature and pressure services. Clamped between the stuffing box face and gland. Furnished with two gaskets, one PTFE and one non-asbestos. 6. L-type clamped seat. Standard clamped type seat that has been modified to fit pumps requiring this configuration. Furnished with two gaskets, one PTFE and one non-asbestos. 7. Modified clamped type seat. Standard clamped type seat that has been modified to fit pumps requiring this configuration. Furnished with two gaskets, one PTFE and one non-asbestos.

Available Seats

All UTEX Seats are available in tungsten carbide, silicon carbide, alox & Ni-resist, depending on pumping requirements.

* O-Ring, Square Section, and L-Type Floating Seats includes Viton Elastomer
# T-Type Clamped and L-Type Clamped include 1125 Seat Gaskets

Type	Size (Standard)	Size (Metric)	Material	PDN Number

©2009 UTEX Industries Inc. All rights reserved.